Double Cylinder Ironworker HIW-120S
The machine design is exquisite and the structure is
stable.Hydraulic transmition and mechanical conventional pressing
are adopted.There are five stations,in which a is an independent
station and BCDE is a combined station.The stroke of pumching and
shearing is adjustable.Different cutters can be selected to cut
,punch, cut, chamber and die shear flat steel,square steel,round
steel,bar,angelk steel,channel steel,I-beam,Z-beam and other common
solid steel materials.The worktable is equipped with T-groove and
ruler,which is convenient for the free installation and adjustment
of tooling and die.Double foot switch,free and independent
operation,double efficiency.
| Model | HIW-60/D | HIW-90/S/D | HIW-120/S/D | HIW-160/S/D |
| Processing Capacity(KN) | 600 | 900 | 1200 | 1600 |
| Material Tensile Strength(Mpa) | ≤450 | ≤450 | ≤450 | ≤450 |
| Ram Stroke(mm) | 80 | 80 | 80 | 80 |
| Number of Stroke(times/min)(mm) | 8-22 | 8-22 | 8-22 | 8-22 |
| Throat Depth(mm) | 300 | 355 | 400 | 600 |
| Shear Angle | 7° | 8° | 8° | 8° |
| Flat Shearing | Max. Shearing Capacity (thickness*width)(mm) | 16×250 | 20×330 | 25×330 | 30×355 |
| 8×400 | 10×480 | 16×600 | 20×600 |
| Profile Steel Shearing | Square Bar(mm) | 40 | 45 | 50 | 55 |
| Round Bar(mm) | 45 | 50 | 60 | 65 |
| C-channel(mm) | 126 | 160 | 200 | 280 |
| I-beam(mm) | 126 | 160 | 200 | 280 |
| Angle Shearing | 90° Shearing(mm) | 120×10 | 140×12 | 160×14 | 180×16 |
| 90° Shearing(mm) | 70×8 | 70×10 | 80×7 | 80×10 |
| Hole Punching | Max. Punching Capaciy (diameter*thickness)(mm) | 25×16 | 30×20 | 35×25 | 38×30 |
| Motor | 4 | 5.5 | 7.5 | 11 |
| Dimension(mm) | 1650×800×1780 | 1950×900×1930 | 2350×980×2100 | 2680×1060×2380 |
Standard Series:
Only one operator can work on this machine.
With one standard set of unit, including one pump, one motor and
one valve.
Manual clamping
Without temperature cooling system
S series:
Only one opertaor can work on this machine.
With one standard set of unit, including one pump, one motor and
one valve.
Manual clamping
Automatic clamping system in angle and plate shearing station
Temperature cooling system
D series:
Dual working ironworker(which means two operators can work on the
machine at the same time)
With two sets of hydraulic units, including two pumps, two motors
and two valves.
Automatic clamping system in angle and plate shearing station
Temperature colling system
Standard Functions:
Punching; Angle, C-channel Punching; H-beam Punching
Angle Shear; Round Bar Shear; Square Bar Shear; Flat-Bar Shear;
Angle Miter Shear
Notching;
Optional Functions:
Pipe Notcing
Pipe Punching
Press Brake
Angle Bending
Radius Corners
Rounding off Corners
Bialateral Rounding off
Vee Nocthing
C-channel Jointing
I-Beam Shear
Channel Shear
 |
 | Punching Station
1. A full range of punches and dies are available for various
punchig needs.
2.Quick change retaining nut system for fast punch tooling change.
3.Thoughtfully designed stripper for visibility, safety andease of
use.
4. A large 2-piece table with scales and gauging stops isstandard
on all models. 5.Stripper with interchangeable plates of various openings to
minimize deformation is standard on all models |
Flat Bar Shearing Station
1.Specially machined upper blade to give a clean shearwith minimum
distortion. 2. Lower blade has four usable cutting edges. 3. Variable degree miter-cutting on angle flange. 4. Easily adiustable hold-down. 5.Support table with guides for accurate positioning. |  |
 | Angle Shearing Station
1. Single shear with no material loss and minimal deformation. 2.45° miter-cut is easy and clean. 3. Stationary blades with four usable cutting edges. 4.Selectable corner radii on moving blades for optimumresults on
small or large angles |
Bar Shearing Station
1.One hold-down for various sizes of square bar shear-ing and round
bar shearing. 2.Optional channel and section bar shear tooling is available for
most models.(See specification chart fordetails) |  |
 | Notching Station
1. ldeal for notching of flat bars and angles.
2.Electrically interlocked safety quard for maximumsafety and
visibility. 3.Gauging table included with stops for precise positioning. |
