Hydraulic Ironworker Combined Punching Notching And Shearing
Machine HIW-200
- Punching: Full range of universal punches and dies are
available.unique style allows for large angle iron punching and
large channel punching.Large viewing window on stripper swing away
design for ease of operation.large two piece gauging table with
rulers and stop as standard fittings.Quick change coupling nut and
sleeve for rapid replacement of change.
- Shearing: Round and square bar shear has multiple holes for a
variety of sizes. Adjustable hold down device for round/square
bar,channel/beam cutting. Large strong guarding for max safety. The
angle shear has the ability to cut angle at 45°both top and bottom
leg. This gives the operator the ability to make a picture frame
corner for perfect welds.Diamond shaped blade for quality cuts that
is minimal material lost and deformity. Easily adjustable hold-down
device for accurate plate cutting.Large 15″squaring arm with inlaid
scale.Special anti-distorted blade for quality cutting.Lower blade
has four usable edges.There is screw allow for gap adjust no shim
needed.
- Notching: Unique design allows for cutting of angle and flat bar.
Electrical interlock safety guard and three gauging stops for
precise positioning.The notching section of this hydraulic
ironworker is perfect for notching out metal plate, angle iron and
much more. The notching station also has an over sized table with
material stops. This section of the machine can also be outfitted
with the optional vee notcher.
- Bending: Also bend the plate below 500mm. All the components of
Machine are of the highest quality in their safety, function.
Model | HIW-60/D | HIW-90/S/D | HIW-120/S/D | HIW-160/S/D |
| Processing Capacity(KN) | 600 | 900 | 1200 | 1600 |
| Material Tensile Strength(Mpa) | ≤450 | ≤450 | ≤450 | ≤450 |
| Ram Stroke(mm) | 80 | 80 | 80 | 80 |
| Number of Stroke(times/min)(mm) | 8-22 | 8-22 | 8-22 | 8-22 |
| Throat Depth(mm) | 300 | 355 | 400 | 600 |
| Shear Angle | 7° | 8° | 8° | 8° |
| Flat Shearing | Max. Shearing Capacity (thickness*width)(mm) | 16×250 | 20×330 | 25×330 | 30×355 |
| 8×400 | 10×480 | 16×600 | 20×600 |
| Profile Steel Shearing | Square Bar(mm) | 40 | 45 | 50 | 55 |
| Round Bar(mm) | 45 | 50 | 60 | 65 |
| C-channel(mm) | 126 | 160 | 200 | 280 |
| I-beam(mm) | 126 | 160 | 200 | 280 |
| Angle Shearing | 90° Shearing(mm) | 120×10 | 140×12 | 160×14 | 180×16 |
| 90° Shearing(mm) | 70×8 | 70×10 | 80×7 | 80×10 |
| Hole Punching | Max. Punching Capaciy (diameter*thickness)(mm) | 25×16 | 30×20 | 35×25 | 38×30 |
| Motor | 4 | 5.5 | 7.5 | 11 |
| Dimension(mm) | 1650×800×1780 | 1950×900×1930 | 2350×980×2100 | 2680×1060×2380 |
Standard Series:
Only one operator can work on this machine.
With one standard set of unit, including one pump, one motor and
one valve.
Manual clamping
Without temperature cooling system
S series:
Only one opertaor can work on this machine.
With one standard set of unit, including one pump, one motor and
one valve.
Manual clamping
Automatic clamping system in angle and plate shearing station
Temperature cooling system
D series:
Dual working ironworker(which means two operators can work on the
machine at the same time)
With two sets of hydraulic units, including two pumps, two motors
and two valves.
Automatic clamping system in angle and plate shearing station
Temperature colling system
Standard Functions:
Punching; Angle, C-channel Punching; H-beam Punching
Angle Shear; Round Bar Shear; Square Bar Shear; Flat-Bar Shear;
Angle Miter Shear
Notching;
Optional Functions:
Pipe Notcing
Pipe Punching
Press Brake
Angle Bending
Radius Corners
Rounding off Corners
Bialateral Rounding off
Vee Nocthing
C-channel Jointing
I-Beam Shear
Channel Shear
 |
 | Punching Station
- A full range of punches and dies are available for various punchig
needs.
- Quick change retaining nut system for fast punch tooling change.
- Thoughtfully designed stripper for visibility, safety andease of
use.
- A large 2-piece table with scales and gauging stops isstandard on
all models.
- Stripper with interchangeable plates of various openings to
minimize deformation is standard on all models
|
Flat Bar Shearing Station
- Specially machined upper blade to give a clean shear with minimum
distortion.
- Lower blade has four usable cutting edges.
- Variable degree miter-cutting on angle flange.
- Easily adiustable hold-down.
- Support table with guides for accurate positioning.
|  |
 | Angle Shearing Station
- Single shear with no material loss and minimal deformation.
- 45° miter-cut is easy and clean.
- Stationary blades with four usable cutting edges.
- Selectable corner radii on moving blades for optimumresults on
small or large angles
|
Bar Shearing Station
- One hold-down for various sizes of square bar shear-ing and round
bar shearing.
- Optional channel and section bar shear tooling is available for
most models.(See specification chart fordetails)
|  |
 | Notching Station - ldeal for notching of flat bars and angles.
- Electrically interlocked safety quard for maximumsafety and
visibility.
- Gauging table included with stops for precise positioning.
|
